Job Overview
Haber's technology only creates value when it fits the reality of a specific mill - its unit operations, its variability, its
operators, its data, its constraints. That fit cannot be discovered from a conference room or a customer survey. It has to
be lived on the floor.
As a Forward Deployed Engineer, you go and live inside a customer's mill for two to three weeks at a time during a trial
or a deployment. You learn how the process actually runs, map it properly, run the trial to a measurable result, and
send back to our team in India the structured picture of that mill they need in order to build the right thing.
We are looking for someone who has spent their working life solving mill problems day to day, whether you did that on
a mill's own payroll, or as the supplier the mill calls when the machine misbehaves. If you have commissioned
equipment on a live line, run a chemical or process trial in someone else's plant, or been the outside expert standing in
a control room at 3am, you already know most of this job.
This is the domain half of the role, not the coding half. You will not build the product, you will be the reason it works at
each mill. Your job is to make the technology fit the plant.

Key Responsibilities
Embed at Customer Mills
• Spend 2–3 week blocks on site during trials and deployments, in the control room, on the floor, in shift handovers,
alongside process engineers and operators. Earn their trust and learn their process cold.
• Be the face of Haber at the mill. Troubleshoot, adjust, and keep things moving when reality diverges from the
plan.
• Work the way the mill works: shifts, outages, grade changes and shutdowns set the schedule, not the calendar.
Understand and Map the Process
• Map the unit operations end to end — refining, digesting, bleaching, stock prep, wet end, drying, chemical
recovery and where the variability actually enters.
• Map the control philosophy and the operator decision-making around it: who decides what, on what signal, on
which shift.
• Work the data that describes it all, historian tags, DCS/PLC signals, lab results, batch and production records and
know what “bad data” looks like before it reaches a model.
• Produce the artifacts that make a mill legible to someone who has never stood in it: process maps, tag
dictionaries, mass and energy balances, and a clear statement of what is different about this mill.
Own the Trial
• Run trials at customer mills to a measurable, agreed result - defining the baseline, the success criteria, the
sampling and measurement plan, and the conditions under which the trial is valid.
• Sit with the mill's own numbers and the mill's own people until both sides agree on what the trial showed.
• Diagnose why a trial underperforms, in process terms, and say so plainly.
Customer Success and Adoption
• Drive adoption after go-live: make sure operators and process engineers actually use what has been installed, and
that it holds up across shifts and grade changes.
• Own the day-to-day technical relationship at the mill and be the person the customer calls.• Track and report the outcome the customer was promised — savings, yield, quality, water and energy — in the
mill's own terms.
Close the Loop with the Team in India
• Send structured field input back to Haber's product, data and engineering teams in Pune: requirements, edge
cases, data realities, constraints and validated success metrics — not anecdotes.
• Package and hand over mill data cleanly, with the context needed to interpret it correctly from 12,000 km away.
• Carry patterns across mills so each trial and each deployment is faster than the last.
Who You Will Work With
At the mill you work with operators, shift crews, process engineers, and plant and technical leadership. Inside Haber
you work with the product, data and engineering teams in Pune, who rely on you as their eyes and ears on the floor,
and with the Americas leadership. Between site visits you work from home, on the data and on the handover. This is an
autonomous role, for weeks at a time you may be the only Haber person in the building so expect a regular overlap
with the India team.

Must-Have Qualifications
• Mill-floor process experience. 4–7 years working inside operating pulp, paper, tissue or board mills either on a
mill's own payroll, or embedded in them on behalf of an equipment, chemical, automation, instrumentation or
engineering supplier. What matters is time on the floor, not whose badge you wore.
• You solve mill problems, not paper problems. You have chased a quality deviation to its cause, commissioned
equipment on a live line, or owned a process improvement through to a number. You can talk about a specific
upset you diagnosed and what you changed.
• Trials on live equipment. You have designed or run a trial in an operating plant - setting the baseline, the success
criteria and the measurement plan, and then defending the result to the plant's own people using their own
numbers.
• Engineering judgement. You read a P&ID fluently, reason about unit operations and mass and energy balances,
and can explain why a process drifts.
• Credibility on the floor. Operators and process engineers take you seriously. You have done shift work, run trials,
or lived through a start-up, and it shows.
• Process data literacy. Comfortable with historians (PI or equivalent), DCS/PLC signals, lab and batch data. You
know what a tag is and how process data maps to physical reality.
• Translation and structure. You can walk out of a chaotic fortnight on the floor with a clean, prioritised, written
picture that someone in another country can act on.
• Language. Fluent in French and English. You build trust with operators and engineers on the floor in French, and
work seamlessly with Haber's team in English.
• Location and travel. Based in Canada, Montréal region strongly preferred; US-based candidates with the right
profile also considered, Chicago area preferred. Willing and able to spend 2–3 week blocks on site at customer
mills.
• Engineering degree in Chemical, Process, Mechanical, Paper Science or a related discipline.

Good to Have
• Many mills rather than one — the pattern recognition that comes from watching the same unit operation run
twenty different ways.
• Specific depth in refining, digesting, bleaching, stock preparation, wet end chemistry, the paper machine or
chemical recovery.
• A field, application, technical service, commissioning or start-up background with an equipment, chemical or
automation supplier to the paper industry.
• Advanced process control, Six Sigma or continuous improvement, or a controls and automation role.• Experience introducing a new digital, analytics or optimisation tool onto a plant floor and getting operators to use
it.
• Membership or activity in PAPTAC, TAPPI or the Ordre des ingénieurs du Québec.
• A degree from UQTR (Centre intégré en pâtes et papiers), Université Laval, Polytechnique Montréal, UNB, UBC or
a North American paper science programme.
• An existing network across Québec and Eastern Canada mills.